43
Screen Setup
3
3 Screen Setup
3.2 Brightness
Adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
This menu is not available when Bright is set to Dynamic Contrast mode.
This menu is not available when Eco Light Sensor or Eco Saving is set to On.
3.2.1 Configuring Brightness
1 Press [ ] on the product.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Brightness and press [ ] on the product. The following screen will
appear.
4 Adjust the Brightness using the [ ] button.
To Next Page
Loading...
