Front
MENU button [MENU/ ]
Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu
or return to the previous menu.
Brightness button
If an AV signal is input in HDMI/DVI mode, the Volume is adjusted. If a PC
signal is input, the Brightness is adjusted.
>> Click here to see an animation clip
Volume button
When OSD is not on the screen, push the button to adjust volume.
>> Click here to see an animation clip
Customized Key[ ]
You can customize key assignment for the Custom button according to your pref-
erences.
Note
You can configure the customized key for a required function via Setup > Cus-
tomized Key.
Adjust buttons [ ]
Adjust items in the menu.
SOURCE / [ ] Enter button
Activates a highlighted menu item.
Push the 'SOURCE / ', then selects the video signal while the OSD is off. (When
the SOURCE / button is pressed to change the input mode, a message appears
in the upper left of the screen displaying the current mode -- analog or digital input
signal.)
Introduction
To Next Page
Loading...
