4-1-6. No Video (Video CVBS)
Symptom Audio is normal but no picture is displayed on the screen. -
Major
checkpoints
Check the Video CVBS source
-
Check the Main Chipset.
-
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. -
Diagnostics
Does the CVBS data appear at PIN -
COMP2_Y_CVBS ?
Does the digital data appear at TP-E_
TXCLK+, E_TXCLK- , O_TXCLK+, O_
TXCLK- ?
Yes
Yes
Yes
Yes
Check a set in the 'Stand-by mode'.
Input the video source properly.
Please, Contact Tech support.
Check CN502_NEU.
Change the Main Assy.
Check IC1111 (X5).
Change the Main Assy.
No
No
No
No
No
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the video source and check the
connection of video cable?
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
4
2
Caution Make sure to disconnect the power before working on the IP board.
www.freeservicemanuals.info
Published in Heiloo, Holland.
To Next Page
Loading...
