4-6. Servicing Information
4-6-1. USB Download Method (Main SW)
Samsung may offer upgrades for TV’s rmware in the future.
Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
Insert a USB drive containing the rmware (T-MSUMDEUC)
1.
upgrade into the USB port on the rear of the TV.
Press the MENU button to display the menu. Press the ▲ or ▼
2.
button to select "Support", then press the ENTER button.
Press the ▲ or ▼ button to select "Software Upgrade", then
3.
press the ENTER button to select "By USB". The message
"Scanning for USB. It may take up to 1 minute." is displayed.
The message "Upgrade version XXXX to version XXXX? The
4.
system will be reset after upgrade." is displayed. Press the ▲ or
▼ to select the "OK", then press the ENTER button.
Please be careful to not disconnect the power or remove the
USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the rmware upgrade.
Please check the rmware version after the upgrades are
complete. When software is upgraded, video and audio settings
you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can
easily reset them after the upgrade.
www.freeservicemanuals.info
Published in Heiloo, Holland.
To Next Page
Loading...
