Checking the Current Programme Info
While watching TV, select INFO to view information about the current programme.
✎
In order to view the programme info, you must first set the TV's clock. Set the Clock (System → Time → Clock).
✎
The programme information may vary depending on the type of incoming signal and may not be available at all for
certain programmes.
In addition, select right button to view information about the next programme, and press enter, to set up a Schedule
Viewing for the upcoming programme.
Change the Broadcast Signal
Broadcasting → Aerial
Choose your preferred method of receiving digital broadcasts.
Digital Signal Info and Strength
Support → Self Diagnosis → Signal Information
Select Support → Self Diagnosis → Signal Information. Displays the digital channel's signal information and strength.
✎
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to adjust the
antenna for increased signal strength and improved HD channel reception.
✎
This is only available for digital channels.
To Next Page
Loading...
