Why did my Samsung LED TV turn on by itself?
If your Samsung LED TV turned on by itself after being off for about 45 minutes, this is normal behavior. The TV uses the OTA (Over The Air) function to automatically update firmware downloaded while you were watching TV.
How to fix intermittent loss of audio or video on Samsung LED TV?
Loss of audio or video on your Samsung LED TV can be caused by using cables that are too rigid or thick. Check the cable connections and reconnect them. Ensure the cables are flexible enough for long-term use. If mounting the TV to the wall, consider using cables with 90-degree connectors.
Why does my Samsung T28E310EW say “This file may not be playable properly”?
If you see the message “This file may not be playable properly” on your Samsung LED TV, it might be due to the high bit rate of the content. Usually, the content will still play, but you might experience some issues with its playability.
What to do if my Samsung T28E310EW LED TV shows “Scrambled Signal” or “Weak or No Signal”?
If you see “Scrambled Signal” or “Weak or No Signal” on your Samsung LED TV, and you're using a CAM CARD (CI/CI+), ensure it's properly inserted into the common interface slot. If the problem persists, try removing the CAM CARD and reinserting it into the slot.
How to fix recurrent picture/sound issues on Samsung T28E310EW LED TV?
If you are experiencing recurrent picture or sound issues on your Samsung LED TV, try checking and changing the signal or source to resolve the problem.
Why is the PIP menu not available on my Samsung LED TV?
PIP functionality on Samsung LED TV is available when you are using a TV, AV, Component, HDMI2/ DVI, EXT., or HDMI1 source.
What to do if rubber cushion pads on my Samsung T28E310EW base stand react with furniture?
To prevent a reaction between the rubber cushion pads on the base stand and the top finish of some furniture, use felt pads on any surface of the Samsung LED TV that comes into direct contact with furniture.
Why do I see small particles on the edge of my Samsung T28E310EW frame?
This is part of the product’s design and is not a defect.
General| 3D | No |
|---|---|
| Panel type | VA |
| Screen shape | Flat |
| Response time | 8 ms |
| Display diagonal | 27.5 \ |
| Display brightness | 250 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| LED backlighting type | - |
| Contrast ratio (typical) | 1200:1 |
| Display brightness (min) | 200 cd/m² |
| Display diagonal (metric) | 69 cm |
| Supported graphics resolutions | 1366 x 768 |
| Dynamic contrast ratio marketing name | Mega Contrast |
| Audio system | Dolby Digital Plus, DTS Studio Sound, DTS Premium Sound 5.1 |
| Remote control type | TM1240 |
| USB 2.0 ports quantity | 1 |
| Annual energy consumption | 47 kWh |
| Ethernet LAN (RJ-45) ports | 0 |
| Digital signal format system | DVB-C, DVB-T |
| Tuner type | Digital |
| Audio decoders | Dolby Digital, DTS, Dolby Digital Plus, DTS Premium Sound 5.1, DTS Studio Sound |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| Consumer Electronics Control (CEC) | Anynet+ |
| Number of OSD languages | 27 |
| Product color | Black |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 44 W |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 32 W |
| Package depth | 158 mm |
| Package width | 798 mm |
| Package height | 505 mm |
| Package weight | 6420 g |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 151.1 mm |
|---|---|
| Height (with stand) | 430.8 mm |
| Weight (with stand) | 4450 g |
| Depth (without stand) | 52.7 mm |
| Width (without stand) | 643.4 mm |
| Height (without stand) | 383.6 mm |
| Weight (without stand) | 3850 g |
Details safety precautions for using the product, including warnings and cautions.
Provides step-by-step instructions for assembling and attaching the TV stand.
Details the function of each button on the standard remote control for TV operation.
Details how to access and operate the TV's on-screen menus and settings.
Illustrates the correct procedure for connecting the power cord and antenna/cable.
Guides on connecting external audio/video devices like Blu-ray players using HDMI.
Details optimal PC display resolutions and settings for D-Sub and HDMI/DVI inputs.
Explains how to select and manage different input sources connected to the TV.
Describes different picture modes (Dynamic, Standard, Movie, Entertain) and their suitability.
Details how to adjust Backlight, Contrast, Brightness, Sharpness, Colour, and Tint.
Explains options for adjusting picture size and aspect ratio, including Auto Wide, 16:9, Zoom, and 4:3.
Instructions on how to use the Picture-In-Picture feature to watch multiple sources simultaneously.
Covers advanced picture adjustments like Dynamic Contrast, Black Tone, Flesh Tone, and Colour Space.
Details various sound modes (Standard, Music, Movie, Clear Voice, Amplify) for audio customization.
Explains how to adjust sound effects like DTS TruSurround HD, DTS TruDialog, and Equaliser settings.
Covers speaker selection, auto volume adjustment, and TV installation type for optimal sound.
Details advanced sound settings such as DTV Audio Level, Digital Audio Out, and Audio Delay.
Instructions on tuning and memorizing broadcast channels using Auto Tuning and Manual Tuning.
Guide to managing channels, including channel list, sorting, and channel modes.
Allows users to set desired channels to display automatically at a specific time.
Instructions for updating the TV's firmware via USB or broadcast signal.
Provides solutions to common TV issues related to picture quality, sound, and connectivity.
Safety guidelines and procedures for securing the TV to a wall to prevent it from falling.
Technical specifications of the TV, including dimensions, resolution, weight, and environmental conditions.
To Next Page
