Speaker Settings
MENU → Sound → Speaker Settings → ENTERE
• Speaker Select
A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver.
In this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
• Auto Volume
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is
useful at night.
✎
To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV.
Otherwise, a change to the volume control of the source device may not be applied.
• TV Installation Type
Specify the TV's installation type. Choose between Wall Mount and Stand to optimise the TV's sound automatically.
English - 40
To Next Page
Loading...
