Picture Options
MENU → Picture → Picture Options → ENTERE
When connecting a PC, you can only make changes to the Colour Tone.
• Colour Tone
✎
Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.
✎
Settings can be adjusted and stored for each external device connected to an input on the TV.
• Digital Clean View: If the broadcast signal received by your product is weak, you can activate the Digital Clean View
feature to reduce any static and ghosting that may appear on the screen.
✎
When the signal is weak, try other options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays signal strength.
✎
Only available for analogue channels.
✎
When the INFO button is pressed, the signal strength bar is displayed.
✎
When bar is green, you are receiving the best possible signal.
• MPEG Noise Filter: Reduces MPEG noise to provide improved picture quality.
• HDMI Black Level: Selects the black level on the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signals).
• Film Mode: Sets the TV to automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
✎
Available in TV mode and external input mode which supports SD (480i / 576i) and HD (1080i) except in PC
mode.
✎
If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode.
• LED Clear Motion: Removes drag from fast scenes with a lot of movement to provide a clear picture.
✎
The screen may become slightly darker when you play LED Clear Motion.
✎
It may depend on the model.
To Next Page
Loading...
