33
English
Basic Features
Software Upgrade
Software Upgrade can be performed via a broadcasting
signal or downloading the latest firmware from “www.
samsung.com,” to a USB memory device.
Current Version the software already installed in the TV.
✎
Software is represented as “Year/Month/Day_Version”.
Installing the Latest Version
■ By USB: Insert
a USB drive
containing the
firmware upgrade
file, downloaded
from “www.
samsung.com,” into the TV. Please be careful not to
disconnect the power or remove the USB drive until
upgrades are complete. The TV will be turned off and
on automatically after completing the firmware upgrade.
When software is upgraded, video and audio settings
you have made will return to their default settings. We
advise you to write down your settings so that you can
easily reset them after the upgrade.
■ By Channel (depending on the country): Upgrade the
software using the broadcasting signal.
✎
If the function is selected during the software
transmission period, software will be automatically
searched and downloaded.
✎
The time required to download the software is
determined by the signal status.
■ Alternative Software (backup): If there is an issue with
the new firmware and it is affecting operation, you can
change the software to the previous version.
✎
If the software was changed, existing software is
displayed.
■ Standby Mode Upgrade (Off / 1 hour later / 2 hours
later / 00:00 / 02:00 / 12:00 / 14:00) (depending on
the country): A manual upgrade will be automatically
performed at selected time. Since the power of the
unit is turned on internally, the screen may be turned
on slightly for the LED product. This phenomenon may
continue for more than 1 hour until the software upgrade
is complete.
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centres, and how to download
products and software.
TV Side Panel
USB Drive
• The displayed image may differ depending on the model.
Software Upgrade
By USB
By Channel
Alternative Software 2010/01/15_00000
Standby Mode Upgrade : Off
U
Move
E
Enter
R
Return
Current Version 2010/01/18_000001
To Next Page
Loading...
