Anynet+ (HDMI-CEC)
Menu → System → Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your
Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To
be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
✎
You can only control Anynet+ devices using the TV’s remote control, not the buttons on the product.
✎
The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
✎
The Anynet+ functions do not operate with other manufacturers’ products.
✎
For instructions explaining how to connect Anynet+ external devices, refer to the device’s user manual. You must
connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions.
✎
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
✎
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English - 66
To Next Page
Loading...
