What to do if my Samsung CRT TV has no picture or sound?
If your Samsung CRT TV shows no picture or sound, first, try switching to another channel. Then, ensure you've pressed the TV/VIDEO button. Also, verify that the TV is securely plugged into a working power outlet. Finally, check the connections to your antenna.
How to fix poor picture quality on Samsung CRT TV?
If you are experiencing poor picture quality on your Samsung CRT TV, try switching to a different channel. Also, make sure to adjust the antenna. Finally, check all the wire connections to ensure they are properly connected.
What to do if Samsung CRT TV operates erratically?
If your Samsung CRT TV is operating erratically, unplug it for 30 seconds, and then try operating it again.
How to fix if picture rolls vertically on Samsung CRT TV?
If the picture on your Samsung CRT TV rolls vertically, try adjusting the antenna. Also, check all wire connections.
What to do if Samsung CRT TV has no color, wrong colors or tints?
If the colors on your Samsung CRT TV are wrong, or there's no color, first, ensure the program you are watching is broadcast in color. Then, adjust the picture settings. If the TV has been moved or turned, power it OFF for at least 30 minutes.
Provides critical safety warnings and instructions for operating the television.
Key safety precautions to consider when installing, using, and maintaining the TV.
Details on protecting power cords, grounding antennas, and FCC compliance.
Instructions for connecting off-air antennas using 300-ohm flat twin leads.
Guides for connecting 75-ohm round lead antennas and combining separate VHF/UHF signals.
How to connect cable TV directly without a cable box.
Instructions for connecting cable TV via a box that descrambles all or some channels.
Steps to connect a VCR to the television for viewing or recording.
Further instructions on connecting audio and video cables for VCR playback.
Steps to connect a DVD player to the TV for audio and video playback.
How to turn the TV on/off and the initial "Plug & Play" setup process.
Detailed steps for the automatic "Plug & Play" setup and resetting the feature.
How to select the correct video signal source (antenna or cable) for channel memorization.
Steps for automatically scanning and storing available TV channels into memory.
Process for manually adding or erasing specific TV channels from memory.
How to change channels, directly access them, adjust volume, and use the mute function.
A list of common TV issues and their potential solutions.
To Next Page
General