Samsung TXJ2060 - User Manual

Questions and Answers

D
Debra SmithJul 30, 2025
How to troubleshoot no raster and no sound on a Samsung CRT TV?
- B
  Beth SalazarJul 30, 2025
  If your Samsung CRT TV has no raster and no sound, here are some potential causes and solutions: * **No Voltage:** Measure the B[+] voltage at the cathode of D812 (D811). If the +12.5 line is abnormal, check it. * **Voltage Too High:** If the voltage is normal but more than 130V, check the horizontal output signal at TR IC801 Q801 collector. * **Fuse Issue:** If there is an open circuit, check and replace F801. * **Voltage Imbalance:** If the voltage is more than 130V but less than 50V, perform a check and replace components as necessary. * **AVR Circuit:** If the voltage is normal, check and replace the FS AVR circuit or the AVR circuit itself. * **Other Components:** Also, check D801, consider shorting the degaussing coil, and inspect C801.
E
Eric MartinezAug 6, 2025
What to do if my Samsung CRT TV has no color?
- J
  Jason WilkinsAug 6, 2025
  If your Samsung CRT TV has no color, try the following: * **Display Button:** First, push the "Display" button on the remote control. * **Signal Check:** Check if the OSD shows "PAL-M", "PAL-N", or "NTSC" signal. Then check B[+] (5V). * **Component Checks/Replacements:** Inspect and replace ICP01, ICH01, IC901, QL01, QL02, XL01, XL02, X202, and IC201 as needed. If there is an abnormal signal, check IC901. If XL01, XL02 and X202 are abnormal, check and replace that part.
N
nsaundersAug 11, 2025
What to do if there is no raster but sound is OK on Samsung CRT TV?
- S
  Spencer MartinAug 11, 2025
  If your Samsung CRT TV has no raster but the sound is okay, consider the following: * **FBT Issues:** Check and replace the FBT (Flyback Transformer) if it's abnormal. Also, if the CRT heater is lighting, check the H.V of CRT. If normal, check/replace the FBT CRT Drive Circuit. * **I2C Data:** If there is an abnormal signal, check the I2C Data. * **IC201:** Check/Replace IC201.
B
Brenda GouldAug 17, 2025
Why is there no sound on my Samsung TXJ2060 CRT TV?
- N
  Nathaniel ColemanAug 18, 2025
  If your Samsung CRT TV has no sound, here are a few things to check: * **IC603:** If the signal is normal, check IC603. * **IC701:** If the signal is abnormal, check IC701 and consider replacing it.
L
Lisa LarsonAug 23, 2025
How to fix no vertical scan (horizontal line) on Samsung CRT TV?
- R
  Rebecca WangAug 25, 2025
  If your Samsung CRT TV shows no vertical scan (just a horizontal line), here are some steps to take: * **Check Diodes:** Check D812 (D811) for any abnormalities. * **FBT Inspection:** Check and replace the FBT if necessary. * **IC201 Replacement:** Check and replace IC201.