3. Installing the Product
English 8/2020. Rev 0.3 77
35. Connect SMU B+ and Battery Module #16 B+ using “BUSBAR M TO SMU.” SMU B+ terminal is connected using an M12xL25
screw and Module #16 B+ terminal is connected using an M8 screw. Measure the contact resistance between the terminal
and the bus bar.
Figure 3-88: Connect SMU B+ and Module #16 B+.
36. Reattach Battery Module #16’s front cover and SMU B+ terminal cover.
Figure 3-89: Reattach Battery Module #16’s Front Cover and SMU B+ Terminal Cover
To Next Page