English - 9
English
Using the touchpad
Use the touchpad to perform various commands. Navigate to Tutorial (System > Device Manager >
Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.
Dragging Press
Drag on the touchpad in the desired direction. Move the focus or the
pointer in the direction the finger is dragging.
Press on the touchpad. This selects the focused item. When watching
TV, pressing and holding the touchpad displays the channel list. On some
apps, pressing and holding the touchpad for over 2 seconds displays a
list of functions available for the app.
Changing Channels by Entering Numbers
While watching TV, tap on the protruding line on the left or right edge of
the touchpad to bring up the numerical input window on the screen. Use
your finger to enter the number for the channel you want to watch. The
recognised number is displayed on the screen and the TV switches to the
corresponding channel. However, the number you have entered may not be
recognised properly by the TV. Refer to the guide below to ensure that your
numerical entries are recognised accurately.
Numerical Input Guide
Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you
do not follow the sequences shown below.
Adjusting the Touchpad
Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust
sensitivity and make it more convenient to use.
Show Status and Notification Banner
Press the MORE button on the Smart Touch Control and then select STATUS on the virtual control panel
that appears on the screen. The status and notification banner is shown at the top of the screen.
[UF7500_8000]BN68-04795D-02L02.indb 9 2013-05-08 5:07:43
To Next Page
Loading...
