Pairing the TV to the Samsung Smart Control
If your Samsung Smart Control is not paired to your TV, press and hold the buttons
labelled ① and ② simultaneously for 3 seconds or more to pair the Samsung Smart
Control to the TV.
- The Samsung Smart Control can only be paired to one TV at a time.
Connecting to a Network
Connecting the TV to a network gives you access to online services, such as Smart Hub, as well as software updates.
Network Connection - Wireless
Connect the TV to the Internet using a standard router or modem.
Wireless IP Router or Modem with
a DHCP Server
LAN Cable (Not Supplied)
The LAN Port on the Wall
Network Connection - Wired
One Connect
Connect your TV to your network using a LAN cable.
- The TV does not support the network speeds less than or equal to 10 Mbps.
- Use a Category 7 cable for the connection.
Mobile Network
- Availability depends on the specific model and area.
While connecting to the mobile network, some functions might be unavailable.
Refer to the diagram and insert the Mobile Dongle (sold separately) into the USB
port. The Mobile Dongle must be connected to the TV in order to connect to
the mobile network. However, the Mobile Dongle is sold separately and is not
available from Samsung.
- If you have any problems using online services, please contact your Internet
service provider.
Supported Telecom and Model Name
For more information, refer to the
e-Manual
.
English
English - 5
[JS9500-SJ]BN68-07203E-00L03.indb 5 2015-03-24 �� 3:29:02
To Next Page
Loading...
