3-2
3. Disassembly and Reassemble
Description Picture Description Note
4
Remove the Power Cables, Function
Cable, LVDS Cable, LED Cable.
Function Cable Connector
Power Cable Connector
LED Cable Connector
LVDS Cable Connector
5
Remove the SMPS Board and Main Board.
Gently lift up to release the lock.•
Use both hands to hold the board and •
slide UP to release the board.
Locking
Locking
Locking
6
Completed disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
