4-1-5. No Video (Tuner_CVBS)
Symptom Audio is normal but no picture is displayed on the screen. -
Major
checkpoints
Check the Tuner CVBS source.
-
Check the Tuner, Check the SX1.
-
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. -
Diagnostics
Does the DC TU5V_PW, TU33V_PW
appear at TP - TUNER_33V, B 5V
Pin of Tuner ?
Does the digital data appear at
TP - O_TXCLK+, O_TXCLK-,
F_TXCLK+, F_TXCLK- ?
Yes
Yes
Yes
Yes
Check a set in the 'Stand-by mode'
Input the RF source properly.
Please, Contact Tech support.
Change the Main Assy.
Check IC1102 (SX1).
Change the Main Assy.
No
No
No
No
No
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Check the RF source and
check the connection of RF cable ?
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
2
Caution Make sure to disconnect the power before working on the IP board.
To Next Page
Loading...
