Motion Control Environment Test
Screen Menu → Smart Features → Motion Control → Motion Control Environment Test
Run this test before using Motion Control to ensure proper functionality
Run Motion Control Environment Test and select Start within 4.9ft and 13.1ft of the TV. If light reects on the TV1.
Adjust the camera angle so that you appear inside the square displayed on the screen. Once you have nished2.
Motion Control Options
Motion Control: Activates/deactivates Motion Control.
Animated Motion Guide: Displays an animated guide when user motion is detected.
Motion Control Activvation
Raise your hand with the palm facing the TV. Hold it for a moment and slowly wave your arm and hand from side to side
three or four times. When your hand is successfully recognized, the Motion Control is activated and an arrow cursor is
displayed on the screen.
Using the Basic Motion Controls
The following basic motion control commands are available:
This action moves the cursor to the
desired position.
Make a st to select an option or
execute a command. Keeping your
st clenched is like holding down a
remote control button.
Make a circle with your hand in the
counterclockwise direction to return to
the previous menu.
Motion Control Screen
Screen Icons Explanation
Adjust the volume.
Turns the TV sound on/off.
Changes the channel.
Launch Smart Hub.
Check the recommended program information and air times. Select a program from the list to view
detailed information about that program.
Enter a channel number using the number panel to jump to the channel. Use the playback control
panel with the on-screen color buttons to control a media le that is currently playing.
Change the source.
Turn off the TV.
Zoom ZoomRun / Select
To Next Page
Loading...
