Previous Check
Check the various cable connections rst.1.
Check to see if there is a burnt or damaged cable. -
Check to see if there is a disconnected or loose cable connection. -
Check to see if the cables are connected according to the connection diagram. -
Check the power input to the 2. ASSY PCB MAIN.
Power Cable
LVDS Cable
ASSY PCB MAIN
DC VSS-LED PD BD
ASSY SPEAKER P (R/L)
ASSY T CON P
ASSY BOARD P-JOG FUNCTION
ASSY PCB MAIN (CN202)
9 A13V 10 UNDER_DRIVER
7 A13V 8 PWM_DIM
5 A13V 6 SW_POWER_TO _SMPS
3 A13V 4 GND
1 GND 2 GND
Check the power in & output between 3. DC VSS-LED PD BD (SMPS) & ASSY PCB MAIN, ASSY PCB MAIN & Panel, IP &
Panel.
4. Troubleshooting
4-1. Troubleshooting
4-1
4. Troubleshooting
To Next Page
Loading...
