3-2
3. Disassembly and Reassemble
Description Picture Description Note
BN81-12884A
BN81-10739A
3
Insert the Opening-Jig at the indicated
positions to release bottom left corners of
the rear cover.
Opening-Jig(BN81-12884) is required.•
Insert Opening-Jig as shown in the picture.
CAUTION
Be careful during disassembly at Parting(must glove).•
Be careful during disassembly at corner ribs.•
Hooks can be damaged when disassembling is done by hands or tools which is bigger than •
Opening-Jig.
Be careful the damage of Chassis-Front and Cover-Rear.•
4
Open-Jig should be fully inserted and then
pry to release the rear cover mounting
clips. Move indicated direction.
Open Direction
To Next Page
Loading...
