Samsung UE49K5502AK - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF Info Menu Mute Power ON
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. •
Option
Control
Debug
SVC
ADC/WB
Advanced
T-HKMFKAKUC_-xxxx
T-HKMFKAKUS_-xxxx
tztv-2.4-main2016-hawk-m-fhd_2016*****
BT Version : xxxx
E-Manual : ----
Camera Version : Not Support
Blaster Version :Not Support
E-POP Version :HAWKMFD-****.**
EDID SUCCESS
HDCP SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : xxxx,xxxx,6250,NONE
DTCP Not Support
TCON Version : ------
Model : *********
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : *******(3.0.7.107)
CO Nf/W/M/D/HO P / AO O S / M RO SC SiX
Factory Data Ver : 126 EERC Version :
CPLD/HD :N/A
SmartControl : ****
Date of purchase : mm/dd/yyyy
4-24
4. Troubleshooting