Samsung UN HU6900F Series - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF MUTE 182 Power On
If you have Factory remote control•
INFO Factory
Buttons operations within Service Mode -
Menu Full Menu Display / Move to Parent Menu
Direction Keys ▲/▼ Item Selection by Moving the Cursor
Direction Keys ◄/► Data Increase / Decrease for the Selected Item
Source Cycles through the active input source that are connected to the unit
HOW to enter the Advanced menu (Picture)
1 Cursor move to ‘Advanced’. → 2 Push the ‘0’ button 4 times. → 3 You can see the ‘Picture’ menu.
If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu)•
Option
Control
Debug
SVC
ADC/WB
Advanced
T-NT14UAKUC-xxxx
T-NT14UAUSS-xxxx
BT Version : xxxx
E-Manual : xxxx
Camera Version : xxxx
Blaster-version : ----
EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : xxxx,US,6900,NONE
USB RS232C : OFF
DTP-SDAL-NT14U-MAIN-xxxx-xxxx
RFS : "NT14U 0147" K/2 201x-xx-xx
KERNEL : 142.1214, /
DTP-DTVTD-4612-01
Backend[NT72323]: FW[5xx]
TCON Version : ----
Model : UNxxHU6950
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : ATH6KL(5.0.0.99_0307)
CO Nf/ W/ M/ D/ HO PO AO / S/ N/
Factory Data Ver : 165 / EERC Ver : 56
SmartControl : xxxx
DTP-BP-HAL-4612
DTP-BP-MW-4612-01
DTP-BP-APP-4612-01
POP-FLA-14-UHD_FLAT-008
Date of purchase : mm/dd/yyyy
4-26
4. Troubleshooting
All manuals and user guides at all-guidesbox.com