Samsung UN J5500AF Series - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF MENU 1 8 2 Power ON
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus. •
Option
Control
Debug
SVC
ADC/WB
Advanced
T-HKMFAKUC-xxxx (T-HKMFUABC-xxxxx : A****)
T-HKMFAKUC-xxxx
tztv-2.2.1-hawk-m-fhd_2015*****
BT Version : xxxx
E-Manual : HMFxxxx-****
Camera Version : Not Support
Blaster Version :Not Support
E-POP Version :HAWKNFH-****.**
EDID SUCCESS
HDCP SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : xxxx,xxxx,5500,NONE
DTCP Not Support
TCON Version : ------
Model : *********
Wired MAC SUCCESS
Wireless MAC SUCCESS
WIFI : *******(5.0.1.41_0105)
CO Nf/W/M/D/HO P / AO O S / M RO SC SiX
Factory Data Ver : 195 EERC Version : 34
CPLD/HD :N/A
SmartControl : ****
Date of purchase : mm/dd/yyyy
4-12
4. Troubleshooting