▶
English
▶
How to set up using the Plug & Access function
1. Turn on the Samsung wireless router and your TV.
2. Insert a USB memory stick into the USB port in your Samsung wireless router.
Check the router’s LED's to make sure it is on (Blinking
→
on).
3. Take the USB memory stick out of the router, and then insert it into a USB port
on your Samsung TV. The memory stick downloads the connection information.
4. Wait until the connection is automatically established.
N
If Plug & Access does not connect your TV to your wireless router, a pop-
up window appears on the screen notifying you of the failure. If you want
to try using Plug & Access again, reset the wireless router, disconnect the
Samsung Wireless LAN adapter and then try again from Step 1. You can
also choose one of the other connection setup methods.
To Next Page
Loading...
