▶
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Go to the Network Settings screen.
(MENU
m
→
Network
→
Network Settings
→
ENTER
E
)
2. Select Wired, press ENTER
E
, then press
ENTER
E
again. The network connection
screen appears and the verification process
starts.
3. Press ENTER
E
. The verification process
stops. Select IP Settings on network
connection screen. The IP Settings screen
appears.
● The displayed image may differ depending on
the model.
IP Settings
IP Mode Manual
DNS Mode Manual
DNS Server 0 . 0 . 0 . 0
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
To Next Page
Loading...
