▶
English
▶
4. Select the field at the top, press ENTER
E
, and then set IP Mode to Manual.
5. Press the
d
button on your remote to go to the IP Address entry field, and
then press ENTER
E
.
6. Enter the first portion of the IP Address (for example, 105) into the first entry
field using the number keys on your remote. Press the right arrow button to go
to the next field.
7. Enter the next portion of the IP Address. Press the right arrow button to go to
the next field.
8. Repeat the entry process for each field in the IP Address.
N
If you make a mistake when entering a number, re-enter the number to correct
it. You can also press the up or down arrow button to change the number one
unit at a time.
To Next Page
Loading...
