▶
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Go to the Network Settings screen.
(MENU
m
→
Network
→
Network Settings
→
ENTER
E
)
2. Select Wireless (General), press the
ENTER
E
button, and then press ENTER
E
again.
3. The Network function searches for available
wireless networks. When done, it displays a
list of the available networks.
4. In the list of networks, press the
u
or
d
button to select a network, and then press the ENTER
E
button twice.
● The displayed image may differ depending on
the model.
IP Settings
IP Mode Manual
DNS Mode Manual
DNS Server 0 . 0 . 0 . 0
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
To Next Page
Loading...
