▶
English
▶
5. If the Enter Security key screen appears, go to step 6. If you selected an AP
that does not have security, go to step 8.
6. Enter the Security key (Security key or PIN).
N
When you enter the Security key (Security key or PIN), use
u
/
d
/
l
/
r
buttons on your remote to select number/characters. Press ENTER
E
to
enter the characters.
N
You can also enter numbers by pressing the number buttons on your
remote.
N
You should be able to find the Pass Phrase on one of the set up screens
you used to set up your router or modem.
7. When done, use the
r
button to move the cursor to Next, and then press the
ENTER
E
button.
To Next Page
Loading...
