▶
English
▶
8. The network connection screen appears and the verification process starts.
Press ENTER
E
to cancel. Select IP Settings on network connection screen.
The IP Settings screen appears.
9. Select the field on the top, press ENTER
E
, and then set IP Mode to Manual.
10. Press the
d
button on your remote to go to the IP Address entry field, and
then press ENTER
E
.
11. Enter the first portion of the IP Address (for example, 105) into the first entry
field using the number keys on your remote. Press the
r
button to go to the
next field.
12. Enter the next portion of the IP Address. Press the
r
button to go to the next
field.
To Next Page
Loading...
