▶
English
▶
13. Repeat the entry process for each field in the IP Address.
N
If you make a mistake when entering a number, re-enter the number to
correct it. You can also press the
u
or
d
button to change the number one
unit at a time.
14. When done entering the IP Address, press ENTER
E
.
15. Press the
d
button to go to the Subnet Mask fields, and then press
ENTER
E
.
16. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
17. When done, select OK at the bottom of the page, and then press ENTER
E
.
The network connection screen appears and the verification process starts.
When the connection has been verified, the “Internet connection successful.”
message appears.
To Next Page
Loading...
