▶
English
▶
■
WPS(PBC) Network Setup
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen.
(MENU
m
→
Network
→
Network
Settings
→
ENTER
E
).
2. Select WPS(PBC), press ENTER
E
, and
then press ENTER
E
again.
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it needs and connects to your network.
4. The network connection screen appears, and network setup is done.
● The displayed image may differ depending on the
model.
Network Settings
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless(General)
WPS(PBC)
One Foot Connection
Connect to the Access Point
easily by pressing the WPS(PBC)
button. Choose this if your
Access Point supports PUSH
button Configuration(PBC).
2/6
To Next Page
Loading...
