▶
English
▶
Issues Solutions and Explanations
There is a dotted line on the
edge of the screen.
•
If the picture size is set to Screen Fit, change it to 16:9.
•
Change the cable/satellite box resolution.
The picture is black and white.
•
If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of Component Input 1 on the TV.
When changing channels, the
picture freezes or is distorted or
delayed.
•
If the TV is connected to a cable box, try to reset the box. (Disconnect
and then reconnect the AC cord and wait until the cable box reboots. It
may take up to 20 minutes.)
•
Set the output resolution of the cable box to 1080i or 720p.
To Next Page
Loading...
