▶
English
▶
5. If you selected Cable, the Cable System screen appears. Select Digital,
and then press ENTER
E
.
N
If you selected Antenna only, Auto Program starts.
6. Select STD, HRC, or IRC, and then press ENTER
E
.
7. Repeat for Analog.
8. Select Next, and then press ENTER
E
. Auto Program starts.
N
After all the available channels are stored, Auto Program removes
scrambled channels. When done, the Auto Program menu then reappears.
This process can take up to 30 minutes.
To Next Page
Loading...
