▶
English
▶
■
Automatic Network Setup
Use the Automatic Network Setting when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to the Network Settings screen.
(MENU
m
→
Network
→
Network
Settings
→
ENTER
E
)
2. Select Wired, press ENTER
E
, and then
press ENTER
E
again.
3. The network connection screen appears
and verifies the network connection. When
the connection has been verified, the
“Internet connection successful.” message appears.
● The displayed image may differ depending on the
model.
Network Settings
Select a network connection type.
Wired
Previous
Next
Cancel
Wireless(General)
WPS(PBC)
One Foot Connection
Connect to the network using
LAN cable. Please make
sure that the LAN cable is
connected.
2/6
To Next Page
Loading...
