Previous Check
Check the various cable connections rst.1.
Check to see if there is a burnt or damaged cable. -
Check to see if there is a disconnected or loose cable connection. -
Check to see if the cables are connected according to the connection diagram. -
Check the power input to the Main Board.2.
Power Ass’y
LVDS Cable
Speaker
Power Cable
Main Ass’y
Main Board Assy (CN202)
9 A13V 10 UNDER_DRIVER
7 A13V 8 PWM_DIM
5 A13V 6 SW_POWER_TO _SMPS
3 A13V 4 GND
1 GND 2 GND
Check the power in & output between SMPS & Main Board, Main Board & Panel, IP & Panel.3.
4. Troubleshooting
4-1. Troubleshooting
4-1
4. Troubleshooting
To Next Page
Loading...
