Samsung UN40H5100AG - Entering Factory Mode

4-3-2. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
If you do not have Factory remote control•
Power OFF INFO MENU MUTE Power On
If you have Factory remote control•
INFO Factory
If you don’t have Factory remote control, can’t control some menus•
Initial SERVICE MODE DISPLAY State 
Option
Control
Debug
SVC
ADC/WB
Advanced
T-NMEGAUSAC-xxxx.x
T-NT14LAUSS-xxxx
E-Manual : NLISDBBRH-xxxx
EDID SUCCESS
CALIB : AV/COMP/PC/HDMI/
Option : 40D6AF0S,BRA_DTV,4200,NONE
DTP-SDAL-NT14L-xxxx
RFS:"NT14L xxxx" K/20xx-xx-xx
KERNEL:xxxx.xxxx,/Onboot: xxxx
TCON Version:----
NSP-DTVTD-xxxx
Model: UN40H5100
Factory Data Ver:xxx
EERC Version: xxx
NSP-BP-HAL-xxxx
NSP-AP-CNC-xxxx
NSP-AP-MM-xxxx
NSP-BP-MW-xxxx
NSP-BP-APP-xxxx
NSP-PNG-xx-xxxx
Date of purchase:-/-/----
4-5
4. Troubleshooting