SVC
Factory Name Range Factory Name Range
Test Pattern FBE Pattern Sel 0
LOGIC Pattern Sel 0
LOGIC Level Sel 255
READ PRE_PATT_SEL 0
READ POST_PATT_SEL 0
Reading PC Mode OFF
LDAsic Pattern Sel 0
FRCS Patt before DDR 0
FRCS Patt after DDR 0
FRCS PC Mode On/Off OFF
Panel Auto Setting
Failure
Press ▶ and the Main Board will automatically read type of the Panel.
When change Main Board or Panel this menu will be helpful.
PANEL DISPLAY TIME 0Hr
LOGIC USB D/L ...
T-CON USB Download
Failure 0
You can upgrade T-con program via USB. Put a upgrading le in USB
memory stick and insert it in USB1 or USB2 connector of the TV.
And press ▶ at the T-CON USB Download menu and it will download
the upgrading le from the USB memory stick.
TC905x7 TC90507 FFT Size_0 0
Guard Interval_0 0
Freq. Offset_0 0
SNR_0 0
IF AGC_0 0
TMCC Lock_0 0
TS Packet_0 0
Master Lock_0 0
A_Modulation_0 0
A_Code Rate_0 0
A_Timer InterLeave_0 0
A_Segments Num_0 0
A_BER_0 0
B_Modulation_0 0
B_Code Rate_0 0
B_Timer InterLeave_0 0
B_Segments Num_0 0
B_BER_0 0
C_Modulation_0 0
C_Code Rate_0 0
C_Timer InterLeave_0 0
C_Segments Num_0 0
C_BER_0
To Next Page
Loading...
