3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the UN46/55C9000ZF LED TV.
WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
Cautions: 1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
Description Picture Description Screws
1. Place the face down on cushioned table.
Remove screw from stand bottorm.
Rear cover
Stand box
6003-000133
(M4, L8, MACHINE)
6003-001003
(M4, L12, TAPTYPE)
Stand box
2. Lift up the rear-cover.
To Next Page
Loading...
