2-35
2. Product specications
9
Select the TV list you want to connect.
Network
You need to set up network.
Press the AP search button
to set up network.
If you have Ap for Auto
AP Search
Auto Confi guration
Skip
Connect TV
Select a TV.
Retry
Network
Select a Network.
PBC(WPS)
Auto Confi guration
If the network setup window appears on the TV, select
<Allow> using the Touch Remote and complete the
connection between the TV and Touch Remote.
or
Stand Side Panel
Touch Remote
Within 20 cm
(If you want to use the SAMSUNG
Wireless LAN Adapter(WIS09ABGN,
WIS09ABGN2 or WIS10ABGN ), you
should use a gender featuring for the
connection.)
New remote
Touch_Remote(00-12-FB-D2-F2-39) has
been detected. Choose whether to use
the remote control.
Allow Deny
Connect TV
10
If you do not use the AP
Connect the “SAMSUNG Wireless LAN Adapter” to the TV.
- If the “SAMSUNG Wireless LAN Adapter” is already connected to the TV, establish the connection again.
or
Stand Side Panel
Touch Remote
Within 20 cm
(If you want to use the SAMSUNG
Wireless LAN Adapter(WIS09ABGN,
WIS09ABGN2 or WIS10ABGN ), you
should use a gender featuring for the
connection.)
New remote
Touch_Remote(00-12-FB-D2-F2-39) has
been detected. Choose whether to use
the remote control.
Allow Deny
Connect TV
If the window as below appears on the TV, tap <OK> on the Touch Remote.
uG
{yOWWTXYTmiTkYTmYTZ`PG
GUGjGGG
GGU
h k
zG~GshuGhGU
zGGGGGGU
lGGGhwGGGUGz
wijGGGhwGGwijGU
wijO~wzP jnGz
Connect TV
Connect TV
Connect remote control to TV.
Connect wireless lan adapter to
TV.
(Retry if it is already connected)
OK Skip
Connect TV
Place your remote control
within 20cm from wireless lan
adaptor.
Stop
Remote control is being
connected to TV.
If the network setup window appears on the TV, select <Allow> using the Touch Remote and complete the
connection between the TV and Touch Remote.
uG
{yOWWTXYTmiTkYTmYTZ`PG
GUGjGGG
GGU
h k
zG~GshuGhGU
zGGGGGGU
lGGGhwGGGUGz
wijGGGhwGGwijGU
wijO~wzP jnGz
Connect TV
Connect TV
Connect remote control to TV.
Connect wireless lan adapter to
TV.
(Retry if it is already connected)
OK Skip
Connect TV
Place your remote control
within 20cm from wireless lan
adaptor.
Stop
Remote control is being
connected to TV.