Samsung UN49MU6500F - Page 6

3-2
3. Disassembly and Reassemble
Description Picture Description
4
Insert the Samsung Service Jig at the
indicated positions (Holes) to release
bottom corners of the rear cover.
BN81-12884A (SVC-JIG)
Example
5
Gently lift up the Rear Cover from the
bottom corners to release all mounting
clips as indicated by Red Rectangles.
If tabs break, Using Back coever as it is.
Bottom : 2 point Locking
Top : 6 point Locking
L : 6 point Locking
R : 6 point Locking
Main part : 1 Point Locking
SMPS part : 1 Point Locking
<Locking tabs locations>
6
Remove the Electric tapes, Remove them.
• Filament Tape
• Dressing
NOTE
When assembling the TV, the electric •
tapes must be applied on the same
locations. Please remember to take a
pictureofwherethetapeswererst
applied.
When assembling the Boards, please •
make sure All Board Mounting Clips
are securly inserted.
Caution Caution