3-3
3. Disassembly and Reassemble
Description Picture Description
7
Remove the 'Lead Connectors' and screws
from the SMPS unit Then carefully remove
the SMPS unit.
Screws
6001-003016 5 EA
- SMPS+PANEL : 5 EA
TORQUE: 7~ 8Kgf.cm.
8
Remove the cables from the 'TV Board'.
9
Remove the ASSY PCB MAIN BOARD.
Gently lift up to release the lock •
(Locking ).
Use both hands to hold (Bottom chassis •
Guide Fixing Hole ) the board and
slide to the left to release the board.
NOTE
When installing the ASSY PCB MAIN
BOARD, verify the board is properly
positioned in all 4 mounting slots.
Bottom chassis Guide Fixing Hole
Locking
Locking
Slide to the left to release the board
Locking Fixing Hole
To Next Page
Loading...
