Samsung UN50RU7100 - Initial TV Setup; Initial TV Setup Process

03 Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
• To perform Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
• If the pop-up for setup does not appear automatically on the Smart Things app on your mobile device, manually add
the TV using Add Device on the dashboard of the Smart Things app, and then continue with the set up process .
• The Smart Things app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
• Noise may occur temporarily when the TV communicates with mobile devices .
Using the TV Controller
You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu . The
Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its
usage, refer to the figure below.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
@eeee@
English -12
Control menu
@: PowerOff
0 = thannel Up
0 Channel Down
TV Controller button / Remote control sensor
l:;J Press: Move
lt] Press & Hold : Select
(D :VolumeUp
0 : Volume Down
@: Source
The TV Controller button is located on the bottom of the TV .