Samsung UN55B8000 - Setting Up Anynet+; Switching between Anynet+ Devices

Setting Up Anynet +
_-_ Press the TOOLS button to display the Tools menu. You can also display Anynet + menu
by selecting Tools _ Anynet + (HDMI=CEC).
[]
Setup
Anynet + (HDMI-CEC) _ Off / On
To use the Anynet+ Function, Anynet + (HDMI=CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivated.
Auto Turn Off _ No / Yes
Setting an Anynet+ Device to turn Off automatically when the TV isturned Off.
The active source on the TV remote must be set to TV to use the Anynet + function.
Ifyou set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Switching between Anynet + Devices
1.
2.
3.
%
%
%
%
%
Press the TOOLS button. Press the ENTER[E# button to select Anynet + (HDMI-CEC).
Press the A or T button to select Device List, then press the ENTER[E# button.
Anynet + devices connected to the TV are listed.
Ifyou cannot find a device you want, press the red button to scan for devices.
Press the A or T button to select a particular device and press the ENTER _ button. It
isswitched to the selected device.
Only when you set Anynet + (HDMI=CEC)to On in the Application menu, the Device
List menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.
Ifyou have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Device List.
Anynet + Menu
The Anynet+ menu changes depending
Anynet+ Menu
View TV
Device List
(device_name) MENU
(device_name) INFO
Recording: (*recorder)
Stop Recording: (*recorder)
Receiver
on the type and status ofthe Anynet+ devices connected to the TV.
Description _
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet + device list.
Shows the connected device menus. E.g. Ifa DVD recorder is connected, the disc menu
of the DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
Stops recording.
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).