3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
If there is no additional coment, it is same for all inches.3.
Description & Screws Picture Description
1
Place the TV on the Curved Cusion.
2
Remove the COVER-STAND DECORATION and
remove screws.
55" : 3 EA•
65" : 3 EA•
Screws
6003-001880
SCREW-TAPTYPE : M4 x L14, ZPC(BLK)
1
1
2
COVER-STAND
DECORATION
3
Remove the ASSY STAND.
To Next Page
Loading...
