3-5
3. Disassembly and Reassemble
Description & Screws Picture Description
12
Removing ASSY PCB MAIN BOARD.
Gently lift up (Top Right corner) to release the •
lock (Locking
).
Use both hands to hold (Bottom chassis •
Guide Fixing Hole
) the board and slide to
the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
Bottom chassis Guide Fixing Hole
Locking
13
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
