3-4
3. Disassembly and Reassemble
Description & Screws Picture Description
10
Remove the Cables marked.
• Power Cable
• ASSY BOARD P-FUNCTION Cable
Power Cable
ASSY BOARD P-FUNCTION Cable
• USI-T Cable
• BLU Cable
USI-T Cable
BLU Cable
11
After removing the Screws and remove the DC
VSS-PD BOARD(SMPS BOARD).
Screws
6001-003016
SCREW-MACHINE : M3 x L5, ZPC(WHT)
Removing DC VSS-PD BOARD(SMPS BOARD).
Gently lift up (Bottom Left corner) to release •
the lock (Locking
).
Use both hands to hold (Bottom chassis •
Guide Fixing Hole
) the board and slide to
the right to release.
NOTE
When installing the DC VSS-PD BOARD
(SMPS BOARD), verify the board is properly
positioned in all 6 mounting slots.
Bottom chassis Guide Fixing Hole
Locking