3-4
3. Disassembly and Reassemble
Description & Screws Picture Description
8
Remove the All Cables.
55 / 65 inches•
- Power Cable
- USI-T Cables
Power Cable
USI-T Cables
9
Remove the ASSY PCB MAIN BOARD.
Gently lift up to release the lock (Locking •
).
Use both hands to hold (Bottom chassis •
Guide Fixing Hole
) the board and slide to
the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
Bottom chassis Guide Fixing Hole
Locking
Locking
Slide to the left to release the board
Locking Fixing Hole
10
Remove the DC VSS-PD BOARD.
Use both hands to hold the • SMPS and gently
lift up at point indicated by the arrow to
release the lock.
55 inches -
Bottom chassis Guide Fixing Hole
Locking
Locking
Slide to the right to release the board
Locking Fixing Hole
To Next Page
Loading...
