Samsung WA10J571 Series User Manual (English)

Questions and Answers:

M
mbrownAug 20, 2025
Why does my Samsung Washer leak water?
- J
  Jennifer Smith DVMAug 20, 2025
  If your Samsung washer is leaking water, several factors could be at play. First, ensure all hose connections are tight and the water supply hose's rubber packing is correctly positioned and screwed in tightly. Also, check that the drain hose is correctly inserted and secured to the drain system. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent excessive suds. Confirm that the water supply hose isn't kinked. If the water supply is too strong, try closing the water tap a little. Finally, inspect the water tap itself for leaks and repair if needed.
M
Michelle HaynesAug 22, 2025
What to do if Samsung WA10J571 does not drain and/or spin?
- M
  mooremelissaAug 22, 2025
  If your Samsung washer isn't draining or spinning, check the following: ensure the fuse is intact or reset the circuit breaker. Verify the electrical voltage is normal and the washer is properly plugged in. For natural drain models, confirm the drain hose is pointed downward and is not clogged or kinked; straighten it if necessary. Also, close the door and press Start/Pause, as the washer won't spin if the door isn't closed.
W
William WhiteAug 25, 2025
Why Samsung WA10J571 Washer vibrates excessively or makes noise?
- J
  John CooperAug 25, 2025
  Excessive vibration or noise in your Samsung washer can stem from several causes. Ensure the washing machine is on a level floor and not touching any other object. Make sure the laundry load is balanced and spread evenly within the machine. Also, confirm the space around the washing machine is free of objects. Note that humming is normal during operation, but objects like coins can also cause noise.
C
Colin HallAug 27, 2025
Why my Samsung WA10J571 does not turn on?
- D
  Dean CooperAug 27, 2025
  If your Samsung washer isn't turning on, first ensure you're using the rated power for the product. Then, check that the power cord is completely plugged in. Finally, inspect the fuse or reset the circuit breaker.
S
stevenmclaughlinAug 28, 2025
What to do if Samsung WA10J571 Washer stops mid cycle?
- L
  Laura EdwardsAug 28, 2025
  If your Samsung washer stops mid-cycle, ensure it's plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Make sure the door is closed, and press Start/Pause to restart the machine. Be aware that the washer makes clicking noises and does a quick drain before filling. Also, there may be a pause or soak period in the cycle. Finally, ensure the inlet hose screens at the taps aren't clogged, and be aware that low voltages can temporarily cause this issue.
L
Lindsey SmithAug 30, 2025
Why Samsung WA10J571 Washer does not start?
- T
  Thomas LewisAug 30, 2025
  If your Samsung washer isn't starting, make sure the door is closed and the water taps are open. Press Start/Pause to initiate the cycle. Ensure Child Lock is not activated. Before filling, the machine clicks and does a quick drain. If the door was opened during spinning, close it and press Start/Pause. The machine might be in Standby or soaking. Check the fuse or reset the circuit breaker.
T
Timothy DaySep 1, 2025
Why Samsung Washer load is wet after cycle?
- J
  jaimewilkersonSep 1, 2025
  If your laundry is still wet after a cycle in your Samsung washer, try using the High or Extra High spin speed, if your model has it. Also, use high-efficiency (HE) detergent to reduce oversudsing. Be aware that small loads (one or two items) can become unbalanced and not spin completely.
D
Derrick ThomasSep 2, 2025
Why my Samsung WA10J571 water is not supplied?
- A
  ashley33Sep 2, 2025
  If water is not being supplied to your Samsung washer, ensure you press Start/Pause after selecting the water supply and that the water taps are open. Check if the filter net at the water supply hose connector is clogged and clean it with a toothbrush if needed. Verify the water supply isn't cut off, and straighten any kinks in the water supply hoses. Open and close the door, then press Start/Pause. Low water pressure can also prolong the start of washing. Adjust the water level using the level selector if it's lower than expected.
M
Matthew TuckerSep 4, 2025
What to do if Samsung Washer water drains out immediately?
- J
  Jeremy MorrisSep 4, 2025
  If water drains out of your Samsung washer immediately, ensure the drain hose is not clogged and is hung over the drain hose hook. Fill the spin basket halfway with water, and try spinning again. Alternatively, lift the end of the drain hose to prevent water from draining, fill the spin basket halfway with water, and then run spinning after releasing the drain hose. Also, ensure the drain hose is installed correctly according to the user manual.
M
Morgan PageSep 6, 2025
Why after cycle detergent remains in the automatic dispenser of my Samsung Washer?
- R
  Rebecca GordonSep 6, 2025
  If detergent remains in the automatic dispenser of your Samsung washer after a cycle, ensure the washing machine is running with sufficient water pressure. Also, make sure the detergent drawer is properly inserted. Try removing and cleaning the detergent drawer before trying again.

Samsung WA10J571 Series Specifications

General

Spin Speed	700 RPM
Type	Top Load
Capacity	10
Energy Rating	3
Body color	Silver
Door	Yes
Inner Drum	Diamond Drum
Water Fall	Yes
Air Turbo Drying System	Yes
Water Level	Yes
Child Lock	Yes
Delay End	Yes
Magic Filter	Yes
Tempered Glass Window	Yes
Net Dimension (WxHxD)	610 x 968 x 670 mm
Net Weight	31 kg
Water Consumption	Unknown
Noise Level (Washing)	Unknown
Noise Level (Spinning)	Unknown
Color	Silver