PROBLEM CHECK & SOLUTION
The water leaks at
the water supply hose
connector.
If the faucet connecting part is loose, water may leak.
Repeat the assembling steps again. (Refer to “Connecting the water supply hose”)
Check if the rubber packing of water supply hose is in the right position.
Screw tightly again.
Is the water supply hose folded? Unfold the hose.
If the water supply is too strong, water may leak.
Close the faucet a little.
Is water leaking from the faucet itself?
Fix the faucet. Water is not supplied.
Did you press the Start/Pause button after selecting the water supply?
If the Start/Pause button is not pressed, water is not supplied. Press the
Start/Pause button.
Is the faucet closed? Turn on the faucet.
Is the filter net at the water supply hose connector clogged with dirty matters?
Clean the filter net by brushing with a toothbrush.
Is the water supply cut off?
If the water supply is suspended, turn off the
faucet and power off.
Spinning makes loud
noises and vibrations.
Check if the laundry is spread evenly in the washer.
Spread out the laundry
evenly and start again.
Check if the washing machine levels on a sturdy flat floor. Set the machine at level.
Is the handle for leveling legs loose? Adjust the legs on the feet for leveling.
Is around the washing machine filled with unnecessary stuffs?
Remove those unnecessary things away from the wash machine.
specification
WA10V5, WA11V5
POWER
CONSUMPTION
WASH
470 W
STANDARD
WATER
LEVEL
HIGH
77 ℓ
SPIN 280 W MID
64 ℓ
DIMENSIONS (mm)
W601XD654XH968 (LOW BASE)
W601XD654XH993 (HIGH BASE)
LOW
55 ℓ
WEIGHT 41 kg EXTRA LOW
43 ℓ
WATER PRESSURE
0.05~0.78 MPa
(0.5 ~ 8.0 kg . f/cm2)
WATER USAGE
212 ℓ
WASHING TYPE Stirring Type
SPIN SPEED 720 rpm
WA12V5, WA13V5
POWER
CONSUMPTION
WASH
470 W
STANDARD
WATER
LEVEL
HIGH
83 ℓ
SPIN 280 W MID
76 ℓ
DIMENSIONS (mm) W601XD654XH993 (HIGH BASE) LOW
55 ℓ
WEIGHT 41 kg EXTRA LOW
43 ℓ
WATER PRESSURE
0.05~0.78 MPa
(0.5 ~ 8.0 kg . f/cm2)
WATER USAGE
227 ℓ
WASHING TYPE Stirring Type
SPIN SPEED 720 rpm
To Next Page
Loading...
