Samsung WA52DG55 A Series User Manual (English)

Questions and Answers:

H
Hannah ChaseAug 8, 2025
What to do if Samsung Washer does not start?
- L
  Linda WillisAug 8, 2025
  If your Samsung washer isn't starting, there are several things to check: * Ensure the door is completely closed. * Verify that the water taps are open. * Press or tap the Start/Pause button. * Confirm that Child Lock is not activated. * Also, the washer may make clicking noises and do a quick drain before filling. If the door was opened during the spin cycle, close it and press Start/Pause to resume. The machine might also be in Standby, paused, or soaking. Finally, check the fuse or circuit breaker.
T
thenryAug 15, 2025
How to fix Samsung Washer that does not turn on?
- J
  Jeanette ThomasAug 15, 2025
  If your Samsung washer isn't turning on, here are a few things to check: * Ensure your home electrical system provides the correct power. * Make sure the power cord is fully plugged in. * Check the fuse or reset the circuit breaker. * If the power was turned off to drain water added by the Active Waterjet function, the power won't turn on until the water is completely drained.
C
Christine ThompsonAug 22, 2025
Why Samsung Washer is not supplying water?
- J
  Jessica AvilaAug 22, 2025
  If your Samsung washer isn't supplying water, consider the following: * Ensure you press the Start/Pause button after selecting the cycle and options. * Verify that the water taps are open. * Straighten the water supply hoses. * Open and close the door, then press the Start/Pause button. If the water supply is cut off, close the tap and power off the washer. If the water level isn't high enough, use the level selector to adjust it.
M
Michael WelchAug 30, 2025
What to do if detergent remains in dispenser after Samsung WA52DG55 A cycle?
- C
  carla63Aug 31, 2025
  If detergent remains in the automatic dispenser after a cycle in your Samsung washing machine: * Ensure the washing machine is running with sufficient water pressure. * Make sure the detergent drawer is properly inserted. * Try removing and cleaning the detergent drawer.